|
Faceting Laps 
NuBond
NuBond is the outstanding pre-polish facet lap. A NuBond lap require little if any break-in to produce smooth finishes. Compared to an electrobond lap, it will scratch less and will cut more consistently over a long service life. To select a NuBond lap, select the mesh or grit that is one level coarser than the electrobond. You"ll love these laps!
For example: If you are replacing a 600 mesh electrobond lap, you would select a 325 mesh NuBond lap.
|
8" |
Price $ | |
Replaces
Electrobond lap |
| 8" |
$139.00 |
 |
600 |
| 8" |
$139.00 |
|
1200 & 1500 |
| 8" |
$139.00 |
|
3000 |
 Raytech's DimaFast F
The preferred electrobond diamond disc for preforming and cutting in large facets. Use Dimafast F when heavy cutting or fast cutting is desired.
8 inch lap Dimafast F
| MESH |
8" lap |
Price |
|
| 180 |
8 inch |
$122.00 |
|
| 260 |
8 inch |
$112.00 |
|
| 360 |
8 inch |
$106.00 |
|
| 600 |
8 inch |
$106.00 |
|
| 1200 |
8 inch |
$112.00 |
|
RAYTECH POLISHING LAPS
| TYPE |
SIZE |
PRICE |
|
| TIN Lap 8" |
8" |
$119.00 |
|
| COPPER Lap 8" |
8" |
$109.00 |
|
| FAST Lap 8" |
8" |
$109.00 |
|
8" Diamond laps.
These laps no longer need the adapter. These are 0.400 thick so no
master lap needed! 1/2" arbor hole instead of adapter. Adapter available if
needed on older plates
| MESH |
COST |
|
| 8" Dyna Disc 170-200 mesh lap |
$65.00 |
*Manufacturing problems- delayed. Will not
sell until resolved |
| 8" Dyna Disc 600 mesh lap |
$65.00 |
* |
| 8" Dyna Disc 1200 mesh lap |
$65.00 |
* |
| 8" Dyna Disc 3000 mesh lap |
$65.00 |
* |
|
8" Dyna Disk Cerium Oxide lap |
$65.00 |
* |
|
8" Dyna Disk Aluminum Oxide lap |
$65.00 |
* |
| Dyna Disc adapter ( IF NEEDED) |
$20.00 |
* |
| Cerium Recharge |
$44.00 |
* |
| Aluminum Oxide Recharge |
$44.00 |
* |
| 
LAPIDARY EQUIPMENT & SUPPLIES
