LAPIDARY EQUIPMENT & SUPPLIES
12" Horizontal Beveler
With Flat Diamond Discs. The Cleanest, Fastest Way to Make Glass Bevels. Shape, Sand and Polish Glass Work Pieces on One Machine
Horizontal Beveler Features:
Water through the drip valve keeps the 12" diamond disc wet. Lap disc turns at 575 RPM. Accessories include water can, 3-12" diamond discs (100G, 360G & 1200G), and 1-10" aluminum disc (felt).
16" Glass Smoother
A Quality Horizontal Glass Smoother Capable of Producing Perfect Bevels of Any Size and Width. Smoothing Beveler Works Best on Straight Lines and Outside Curves.
Glass Smoothing Beveler Features:
The hard bond, 320 grit aluminum oxide smoothing wheel is specifically formulated to bevel glass. Wheel has been cast to Covington's exact specifications and is pre-dressed and tested for balance. The working surface has a 2 degree taper. This means that a straight edge placed at 90 degrees to a line from bore to rim will touch the stone surface for a length of 1 3/4". This length of contact has the advantage of lessening the chance of facets (flat spots) when abrading the work piece.
8" & 10" Glass Cutting Trim Saws
Continued rim blade gives smoother, thinner cuts with special spring steel core material that keeps blade rigid and straight.
Made with cast aluminum table top, tank and blade guard. Unit has neoprene sealed ball bearings with grit slinger protection from cutting waste. Adjustable blade guard. Unit rests on rubber cushions for quiet operation. Blade is mounted on 5/8" steel arbor. Piggyback motor mounts directly on back of unit making it portable and easy to store. Twin drains permit quick cleaning of coolant sump.
Unit comes fully assembled with Continuous Rim blade, 1/3 HP, 110V motor, operating instructions and guarantee (motor shipped separately). Size 19"L x 13 1/2W x 12"H. Shipping weight 75 lbs.
10" Cork & Felt Glass Polisher
A quality glass polisher for pre-polish with pumice and final polish with cerium oxide
Same as No. 5051 unit above but with 10" x 2" and 10" x 2" felt wheels installed. Wheels are dressed and tested for balance at the factory. Felt wheel is installed with metal side supports. Wheels turn at slow 420 RPM to minimize polish powder loss. Rim speed of 1,100 SFM creates the friction necessary for a brilliant finish.
Unit comes fully assembled with belt guard, 1/3 HP motor, instructions and guarantee
16" Cork & Felt Glass Polisher
Vertical Polisher Features:
Arbor with 1" diameter x 25 1/2" long shaft can be quickly disassembled (4 bolts) for pulley change or bearing inspection. Heavy duty ball bearings are sealed and greased for life. Two 1/2" O.D. x 30" long plastic tubes provide optional drain system. Just squeeze tube ends, insert in drain ports and drain lines are in place. Water valves take 1/4" O.D. plastic tube for gravity water flow or 1/4" copper tube for pressure system.
Unit comes with 16" x 3" cork and 16" x 3" felt wheels installed, dressed and tested for balance at the factory. Wheels turn at slow 280 RPM to minimize polish powder loss. Rim speed of 1,200 SFM creates the friction necessary for a brilliant finish.
Unit is fully assembled with belt guard. 1/2 HP motor, instructions and guarantee
Most major credit cards. VISA-MASTERCARD, DISCOVER