|
| | XRISTAL TEK 99
OMF
Scintillator 88
Polymetric Faceting machines
Xristal-tek "99" Digital SE
Both the Scintillator and the Xristal-Tek come with
transfer block, 45º table dop, and set of 12 dops
Xristal Tek99 8" Model $2300.00
OR call for current pricing - Base: Made of high strength 6061 aluminum alloy, this plate is 18 inches long, 11 inches wide and 3/8 inch hardened black anodized finish.
- Arbor:
. The Arbor platen rides on preloaded ball bearings to eliminate end play. The Arbor has adjusting features for aligning the horizontal swing of the dop arm assembly.
- Motor: 3 inch diameter PM motor with 38 in. oz. Of torque and 6000 rpm. (Arbor speed 0 to 2800 rpm)
- Drive Belt Tension: Self adjusting.
- Upright : This vertical shaft is 3/4” diameter, 17 ½ Inches tall and nickel plated.
- Height Adjustment: Push button quick release height adjustment allows you to go from one end of the mast to the other. Plus micro height assembly is a single unit on the upright. Calibration is .007 for each dot. One full turn equals .086.
- Horizontal slide: Round dove tail, positive lock any position.
- Vertical Slide: Positive lock with easy push button release move from one end of the mast to the other.
- Digital Read Out: Compact integrated electronic circuitry is easy to view LCD display, 0.7” high (black figures on silver background) with 1/10º space resolution and continuous synchronous LCD reading with movement of dop arm. (pot linearity .5%)
- Angle Stop: Is positive with micro fine adjustment.
- Dial Indicator: Repeat gauge to be used to read between 1/10º increments of the angle display.
- Dop Arm: Is concentrically adjustable to .0002 TIR (total indicated runout). The dop arm can be removed easily with out removing the index gear. This access allows multiple head operations by commercial faceting or schools.
- Precision Collet Chuck: This chuck is a split self–centering type.
- Dop Alignment: Is done with a set screw that permits removal and replacement of the dop while maintaining radial alignment.
- Index Trigger: Is a brass tooth that can be replaced when ever needed.
- Index Splitter: (cheater): Radial type rotates the dop arm 10º right or 10º left of the center position. This adjustment is smooth and with anti–back lash.
ACCESSORIES | Extra Dop Arm (scintillator and xristal-tek) | $95.00 | | | Lamp | $48.50 | | | Water Tank with Drip Delivery System | $45.00 | | | Girdle/Main Angle Steady Rest (xristal-tek) |
$95.00 | | Export Step Down Transformer
(230V 50160HZ to 115V 50160HZ) | $147.50 | | | 8” Adapter Splash Ring (xristal-tek) | $49.95 | | | Index Gears (xristal-tek) 32, 60-3, 60-5, 64, 72, 80, 88, 96, 108, 120 CHOOSE AT CHECK OUT | $32.95 | | | Polyurethane Belt ( xristal-tek) | $9.95 | | | Arbor Assembly ( xristal-tek) | $95.00 | | | ________________________________________________________________________________________
 Polymetric O.M.F (Optical Magnified Facet)
| A: | 2-1/2" 5,000 rpm 90v dc pm motor. | | B: | Control box with variable speed control, reversing switch, and separate power switch. | | C: | Gear box has push button disengagement of reciprocation and swivel spacer to hold position. | | D: | Spring loaded between gear housing and main body to hold out end play while reciprocation is disengaged. | | E: | Spring loaded push pin for locking the main shaft while tightening or loosening the collet nut. | | F: | Ratchet lever for vertical adjustment for changing the plane of the mandrel. (also has a adjustment for horizontal rotation. | | G: | Pivot block and lock down for micro adjustment. | | H: | Micro adjustment stabilizer rods have been lengthened to 5" for larger stones. | | I: | Micro adjustment to hold the dop in place while cutting and polishing. | | J: | Now aluminum tubing for more ridgity. | | K: | Collet nose and main shaft is made from stainless steel and accepts a 3/4" open end wrench. | |
Cylinder curved facets with the same precision as flat facets
| - The O.M.F. (Optical Magnified Facet) unit is the latest state of art in gem cutting. It heralds a new era in faceting by creating new and unique optical and geometric effects. It will provide unlimited possibilities for new designs which were previously impossible.
- The O.M.F. unit is sure to test and expand the skills of experienced cutters as well as to kindle new levels of creativity in the art of gem cutting. While this unit is not generally for the beginning novice, it can be mastered by almost anyone.
- O.M.F. unit comes as pictured above with one set of 3/4 inch mandrels.
| | | PolyMetric OMF | $1495.00 |
| 
| Size | Copper Course | Phenolic Med/Fine | Polycarbonate Polishing | | | 1/2” | $ 18.55 | $ 18.15 | $ 19.95 | | | 5/8” | $ 19.45 | $ 18.15 | $ 20.75 | | | 3/4” | $ 23.35 | $ 22.05 | $ 24.65 | | | 1" | $ 25.95 | $ 24.65 | $ 27.25 | | | 1-1/4” | $ 31.15 | $ 29.85 | $ 32.45 | | | 1-1/2” | $ 37.65 | $ 36.35 | $ 38.95 | | | 1-3/4” | $ 46.75 | $ 45.45 | $ 48.05 | |
Scintillator 88 model
(Lamp sold separately )
Features You Should Know About - Base: Made of high strength 6061 aluminum alloy, this plate is 25 inches long, 12 inches wide and 3/8 inches thick with a hardened black anodized finish.Arbor: Machine is designed to accommodate 8 inch laps. The Arbor platen rides on preloaded ball bearings to eliminate endplay. The Arbor has adjusting features for aligning the horizontal swing of the dop arm assembly.
- Motor: 3 inch diameter PM motor with 38 in. oz. Of torque and 6000 rpm. (Arbor speed 0 to 2800 rpm)
- Drive Belt Tension: Self adjusting.
- Upright Mast: 18 inch high, 1-1/4 inch sq. has a continuos lead screw the entire length of the mass for vertical positioning of the facet head. A calibration scale on the upright is readable to 1/16 inch. This feature is ideal for faceters using the ‘meet point’ faceting method.
- Height Adjustment: Positive push button design for quick height change from one end of the mast to the other ( a real time saver since there is no need to crank the facet head the length of the mast) . Plus micro adjustment for fine height setting where by the knob calibration is readable to .0035” change, with one full turn equal to .035” change in height.
- Round Dove Tail Slides: For both horizontal and vertical movements this easy to use slide has a positive lock in any position.
- Digital Read Out: Compact integrated electronic circuitry (inside facet head) is easy to view LCD display, 0.7” high (black figures on silver background) with 1/10º space resolution and continuous synchronic LCD reading with movement of dop arm. (pot linearity .1%)
- Angle Stop: Is positive with micro fine adjustment.
- Dial Indicator: repeat gauge to be used to read between 1/10º increments of the angle display.
- Dop Arm: Is concentrically adjustable to .0002 TIR (total indicated runout). The dop arm can be removed easily with out removing the index gear. This access allows multiple head operations by commercial faceting or schools.
- Precision Collet Chuck: This chuck is a split self –centering type.
- Dop Alignment: Is done with a set screw that permits removal and replacement of the dop while maintaining radial alignment.
- Index Trigger: Is a brass tooth that can be replaced when ever needed.
- Index Splitter: (cheater): Radial type rotates the dop arm 10º right or 10º left of the center position. This adjustment is smooth and with anti-backlash.
Both the Scintillator and the Xristal-Tek come with transfer block, 45º table dop, and set of 12 dops | SCINTILLATOR 88 DIGITAL | $ 3250.00 |
|
DISCLAIMER Top
|
LAPIDARY EQUIPMENT & SUPPLIES
