|
Diamond Pacific's TC-6 complete
This model has a 8 x 10 flat table for cutting large slabs! Table swings up for easy cleaning and has a removeable sheild. Cast Aluminum construction with impact resistant finish! 5/8" arbor with two sealed bearings. Includes 1/3 hp 110v motor, base board, splash guard. ( vise and blade not included)
| TC-6 complete | $505.00 |
 | | Vise | $65.00 |
| Basic model minus motor. baseboard, vise and blade sold below.
| Basic TC-6 saw | $235.00 |
| | Vise | $65.00 |
|
Raytech Jem Saw 45
 |
Features machine with 5" x 012 x 5/8" Yellow Blazer Blade |
|
|
High-torque motor (60 in-oz) won't stall in normal use |
|
|
Versatile machine accepts either 4" or 5" blade |
|
|
Fast & quiet, 3000 RPM for better cutting, longer blade life |
|
|
"On-center" trimming allows maximum accuracy even difficult shapes like crosses |
|
|
Drop edge table eliminates interference on slab cuts |
|
|
Vise or trim table attaches in two seconds and in alignment |
|
|
Innovative guard design for slab cuts of any length |
|
|
Gemstone glides into cut on exclusive stainless steel table |
|
|
Convenient lift-out sump liner for easy cleaning |
|
|
Front splash shield included (not shown) |
|
|
Lamp is OPTIONAL
|
Super Cut Jem Saw
5"x012x5/8" Yellow Blazer Blade | $500.00 | | Super Cut Jem Saw
(EXPORT MODEL) | $595.00 | | |
Moffit Lamp | $60.00 | | ___________________________________________________________________________________________
| MK-170 Features: |
| • |
High-torque 1/2 HP motor |
| • |
High-impact thermoplastic water reservoir |
| • |
MK-Safeswitch™ prevents saw from being operated when
locking key is removed |
| • |
7" 303P diamond blade, sharpening stick & submersible
water pump included |
| • |
One-year limited warranty |
|
MK-170 Included Accessories
|
| 7" x .067 303P
Diamond Blade |
| 60 Grit Aluminum
Oxide Sharpening Stick |
| Submersible
electric Water Pump |
| Rip Guide |
|
|
|
|
| $198.00 |
|
________________________________________________________________________________
| MK-145 Features |
| • |
Cuts large-size ceramic, marble, granite, slate,
and terra-cotta wall and floor tiles up to 1 inch thick |
| • |
Built-in miter table allows for the cutting of
precision 22º and 45° |
| • |
Easy alignment precision rip guide can be used on
either side of blade |
| • |
Built-in MK-Safeswitch™ |
| • |
Includes a 4-1/2" x .060 continuous rim blade, 4" x
.020 303 Pro blade and 45 degree rip guide |
| | Motor | | 115V/60Hz |
| | Horsepower | | 1/2 HP |
| | RPM | | 5,500 | |
| $119.00 |
| ____________________________________________________________________________________________
Raytech Deluxe Slab/Trim Saw 
|
|
Deluxe Model includes basic machine |
|
|
Power feed |
|
|
1/3 HP motor, motor base |
|
|
Belt guard |
|
|
Plexiglass hood |
|
|
Splash guard |
|
|
10" x 040 x 5/8" Green Blazer Blade |
|
|
Machine size: 12" x 14" x 31"
|
| Raytech Deluxe Trim Saw | $1345.00 | | |
230 V EXPORT model | $1425.00 |
|
Barranca Diamond Trim Saws
TS-101
( BD-2014 ) 10" Trim Saw without folding table
Model #157229 -- $1085.00 | |
Portable Trim Saw
Incorporates a cooling/flushing system with a removable plastic pan for ease of sludge removal
A recirculating pump directs water to the kerf of the blade using tubes mounted inside the blade guard
Water flow is controlled with a brass feed valve
1-1/2 HP, 1725 RPM thermally-protected electric motor mounted on aluminum castings with corrosion-resistant powder paint coating
Can be used on a folding metal stand or mounted to table or bench
Lapidary version of the COMMERCIAL grade MK-101 tile saw that has been used for over 15 years in the construction industry
Vise available for BD-2014 is additional $50.00
Top __________________________________________________________________________  The WIZARD 6" Trim Saw from Diamond Pacific Uses water as coolant
Small form factor yet cuts big slabs!
Blades are easily changed!
All metal construction that is powder coated
High Torque motor
Comes with Lamp, Sample bottle of water aid, angle block, googles
Blade not included | WIZARD TRIM SAW | $850.00 | | | ___Top________________________________________________________________________________________
Covington 8" & 10" Trim Saws | Clean operating saw ideal for trimming rocks, minerals & glass
Cast aluminum table top & tank
3-3/4" roller bearing slab vise w/ bull dog grip
Accurate cross feed adjustment
Hold down hook keeps rock from climbing blade
Adjustable blade guard
Motor & Power feed are
included for complete unit- see slab saw page
5/8" Arbor ball bearing
Koolerant Kontrol system
Plexiglas hood
and Covington basic notched rim blade
Saw comes mounted on Lami Cushion board
| MODEL # |
Price | | 1508 complete |
$887.00 |
| | 1510 complete |
$910.00 |
| Top
Diamond Pacific's TC-10 Trim/Slab saw
All cast aluminum construction tank
Vise holds 3 5/8 x 6" x 6"
Vise cross feed is 2"
Blade and arbor is CENTERED in table
Hinged hood
Power feed with auto shut off.
| TC-10 Trim/Slab saw | $1,490.00 |
| _____________________________________________________________________________ 
Diamond Pacific's Model 10TS-B Trim/Slab saw
Manufactured from the Orginal HIGHLAND PARK tooling!
Gravity feed!! Blade not included
| 10TS-B | $1190.00 | | _____________________________________________________________________________
 TS-6 Trim Saw
Model #8300017 -- $525.00
| | For the faceter
Great for both slabs & specimens, beginner & professional alike
Large 10 " x 11 " tabletop provides an excellent working area for use with the rock vise or handheld rock specimens
Tabletop is self-aligning
Vise
not included
303 blade is included
GFCI switch included
Motor mount and base board included
Tabletop mounts to a 4 " x 8 " x 6 " reservoir tank and is easily removable for blade changes, oil filling & sludge removal
Blade guard is adjustable for 4", 5" or 6" diameter blades
Saw has a 5/8" diameter shaft & permanently sealed high speed bearings
Motor included 1/3 HP thermal protected 1725 RPM electric motor
This unit is POWDER COATED!!!! Top
| 
LAPIDARY EQUIPMENT & SUPPLIES
