| Wet Belt Sanders
Commercial Grade LARGE Wet Belt Sanders 
Basic Wet Belt Sander
Mounted Wet Belt Sander Sanding/ Polishing Belts and Discs
Deluxe Belt Sander
Commercial Horizontal Sander SILICON CARBIDE BELTS AND LEATHER< FELT, CORK
Combo Wet Belt Sander/Polisher
Covington Wet-Belt Horizontal Sander/Polisher Covington Wet-Belt Horizontal Sanders & Polishers
 |
Uses silicon carbide, diamond, cork, leather, and felt belts for all your needs.
|
|
|
Shielded bearings, double sealed and greased for life.
|
|
|
Delivery sponge for applying water to belt |
|
|
Steel back plate for support.
|
|
|
Sand flat surface horizontally.
|
|
|
Allows much larger pieces to be worked. The 460 horizontal sanders feature a 1.3 HP 110V motor mounted on a 12" x 24" Lam-I-cushion base.
|
|
|
A water valve and spray nozzle is built into the hood for easy hookup to your water supply. The water valve takes 1.4" OD plastic tube for gravity feed or 1/4 copper tube for pressure systems. If needed, drain system can be provided by 1.2" OD plastic tube. Just squeeze tube and insert in the drain port. Overflow can then drain from the sander tank. |
|
|
This unit uses the 3" x 25 7/32" sanding belts, with the quick change belt system so you can change your belt quickly and easily.
|
|
|
The supported back plate gives you approximately a 3" x 6" working surface. |
Basic Wet Belt Sander  Model #464 -- $350.00 |
 |  Size: 11"L x 9"W x17"H
Shipping Weight: 20 lbs.
A really affordable wet belt sander.
Uses 3" x 24" size belts
Sold less motor, water valve and spray nozzle Top
Combo Wet Belt Sander & Muslin Buff Polisher  Model #465 -- $570.00 |
| This combo unit has all the features of the Model #466 sander plus a polish arbor that mounts a 6" muslin buff
Comes complete with a 1/3 HP, 110v motor & belt guard mounted on Lam-I-Cushion base ready to plug in & operate
Size: 25"L x 13"W x 18" H. Shipping weight 45 lbs. Top
Mounted Wet Belt Sander  Model #466 -- $485.00 |
|  Size: 25"L x 13"W x 19"H
Shipping Weight: 45 lbs.
1/3 HP, 110V motor
Belt guard mounted on Lami-I-Cushion base ready to plug in and operate
Water valve and spray nozzle is built in for easy hookup
Water valve takes 1/4# O.D. plastic tube for gravity water flow
USES 3 x 24 belts ( either Silicon Carbide, diamond or felt ) or... 1/4" copper tube for pressure system
Simply squeeze tube end and insert in drain port...overflow can be drained from sander tank Top
Deluxe Belt Sander  Model # 761 -- $790.00 | | 1/2 HP, 110V motor
Uses 3" x 41 1/2" size belts providing for greater surface cutting and extended belt lift
Same water system as the smaller mounted sander
13" high back plate -- Makes it possible to wet sand flat surfaces vertically.
MODEL 760 ( same as above but with 1/3 hp motor and 4" back plate)
1/3 HP, 110V motor
Uses 3" x 41 1/2" size belts providing for greater surface cutting and extended belt lift
Same water system as the smaller mounted sander
4" high back plate -- Makes it possible to wet sand flat surfaces vertically.
| $720.00 |
| Top
Commercial Horizontal Sander  Model #762 -- $780.00 |
| 1/2 HP, 110V motor
Mounted on 12" x 24" Lam-I-Cushion base
Designed for production work
Supported back plate gives you approximately a 3" x 13" working surface
Has the quick-change belt system for quick and easy belt changes
______________________________________________________________________________
COMMERCIAL LARGE WET BELT SANDER by Burr King
Click on photo to enlarge
4 x 60 inch belt track is standard
Smooth work contact assured by precision machining and assembly
Grind on the contact wheel, slack belt, or back-up platen
Work position is adjustable from horizontal to vertical and angles in between
1 HP NEMA 4 "wash down" motor and switch for wet applications
Ground fault interrupter power distribution "rain" box with master switch for the grinder feeder pump to maximize safety in wet grinding modes
Cast aluminum frame for Burr King ruggedness
Belt track guarding is OSHA compliant
Belt change is quick with a linear belt tension device
Dry grinding is as simple as turning off the pump
Bearings are high quality and sealed for life
Integrated water feed system includes pump, water flow adjusting valve, dual 120 degree spray nozzles, stainless steel water receiver tray with drain, sump, and interconnecting flexible tubes
Cast aluminum frame
Platen is full belt width and generously long
One year, limited warranty
STAND NOT INCLUDED IN $2650
Silicon Carbide belts available but are special order ( 4 weeks)
SHIPS FREIGHT COLLECT
Diamond Belts are available for $250.00 per belt. Mesh range from 60 grit to 100,000 mesh | Machine only | $2650.00 |
| | Pedestal stand | $225.00 |
|
Top
|
LAPIDARY EQUIPMENT & SUPPLIES
