|
| | Wet Polishers Barranca Diamond Wet Polishing Kit |
 Model #BD-125 -- $585.00
|  Ideal for handheld grinding & polishing of gemstone & rock materials such as onyx, agate, petrified wood, jade, opal, etc.
Used with attachable diamond cup wheel, 4" diameter resin bond Velcro™ backed pads & 4" felt buff pad
The diamond turbo cup wheel is an aggressive shaping & grinding tool for contour carving & sculpting of the material
Resin diamond discs are used sequentially for polishing
Easily attaches to a standard hose to enable the unit to dispense a steady flow of water through a control valve to the diamond pads & cup wheel
Flexible 4" rubber Velcro™ backer pad is designed to allow for quick pad changes
Arbor shaft is a standard 5/8"-11 thread
Kit Includes:
BD-125 WP electric polishing motor, GFCI switch, 8 - 4" diameter diamond resin pads with Velcro™ backing (grit sizes: 50, 120, 220, 400, 800, 1800, 3500, 8500), 1 - 4" rubber backer pad, 1 - 4" Turbo diamond cup wheel, 1 - 4" felt buff pad, 2 spanner wrenches, instruction manual and carrying case. Electric motor speed: 3500 RPM
Amps: 5.3
Voltage/watts: 110/800
Motor weight: 6 lbs
Pad & cup wheel diameter: 4"
Electric motor shaft thread size: 5/8-11 standard size ______________________________________________________________
DEMO BOX for BD-125
Demo Box helps contain overspray when wet polishing. Water
drains through hole in one corner of pan. 30" x 24" x 6" aluminum box with
acrylic shield on 3 sides. Includes rubber mat & submersible electric water
pump.
$350.00
______________________________________________________________________________________
Water Pumps 
 Great for hooking up a water source to your cabbing machine, wet polisher, grinder, wet belt sander, etc!
$ 59.00
_____________________________________________________________________________ Leather Polishing Pad for Wet Polisher
4" Leather Pad with velcro backed
( comes in rough leather or smooth leather)
Choose type at check out
$ 14.00
_________________________________________________________________________
Rear exhaust pneumatic Wet Polisher BD-2321 KIT | This rear exhaust, pneumatic wet polishing tool is designed for continuous production applications and improved safety. Lightweight and compact, this tool provides the operator with increased comfort and reduced fatigue. Cast from aircraft aluminum, the BD-2321 WR is one of the most durable tools of its kind on the market for polishing stone. The water-tight sealed bearings provide long life and smooth rotational speeds in all operating conditions. The water and air controls on the tool are simple to use and conveniently located. Air vent is at rear of tool so that exhaust is carried away from operators' hands by hose protector. The BD-2321 WR comes with 25' water hose, 5’ air hose, 3’ air/water hose protector, D-handle, wrenches and air tool oil.Includes complete set of 4" resin pads, 4 inch backer pad, 1 4" turbo grinding cup and 1 4" felt disc. | | | Air Pressure | | 90 psi |
| | RPM | | 250 to 5500 |
| | Spindle Shaft | | 5/8" - 11 |
| | Air Inlet | | 1/4" Npt |
| | Output | | 320 W |
| | Length | | 10-1/4 in. |
| | Air Consumption | | 16 cfm |
| | Air Compressor required | | 5 HP min. |
| | Max. Disc Size | | 5" |
| BD2321 Kit | $655.00 |
| | | _________________________________________________________________________  Lapidary Resin Diamond Polishing Pads (WET)
Select mesh size at check out Mesh sizes are 30, 50, 120. 220, 400, 800, 1500, 3000, 8500 , 10,000, 13,000
10,000 and 13,000 mesh in 4" only | 3" | $35.00 | | | 4" size | $35.00 | | | 5" size | $40.00 | | SET of 4" all mesh sizes
50 mesh thru 10,000 | $280.00 |
| SET of 5" all mesh sizes
50 mesh thru 8500 only | $350.00 |
| _
Velcro Backed Silicon Carbide Discs- Wet or Dry
| 4" Disc 50 pieces / box- Wet or Dry | | 80 grit | $26.00 | | | 120 grit | $26.00 | | | 180 grit | $26.00 | | | 240 grit | $26.00 | | | 320 grit | $26.00 | | | 400 grit | $26.00 | | | 500 grit | $26.00 | | | 600 grit | $26.00 | | | 5" Disc 50 pieces /box Wet or Dry | | 80 Grit | $36.00 | | | 120 Grit | $36.00 | | | 180 Grit | $36.00 | | | 240 Grit | $36.00 | | | 320 Grit | $36.00 | | | 400 Grit | $36.00 | | | 500 Grit | $36.00 | | | 600 Grit | $36.00 | | | 7" Disc 50 pieces /box Wet or Dry | | 80 Grit | $66.00 | | | 120 Grit | $66.00 | | | 180 Grit | $66.00 | | | 240 Grit | $66.00 | | | 320 Grit | $66.00 | | | 400 Grit | $66.00 | | | 500 Grit | $66.00 | | | 600 Grit | $66.00 | |
_______________________________________________________________________________________
3", 4", 5" rubber
and RIGID backing plate | Size | Price | | | 3 inch
rubber | $ 19.00 | | | 4 inch
rubber | $ 25.00 |
| | 5 inch
rubber | $ 29.00 | |
| 3 inch Rigid |
$ 17.00 | |
| 4 inch Rigid |
$ 18.00 |
|
| 5 inch Rigid |
$ 28.00 | | _________________________________________________________________________  4" Flat Surfacing Diamond Wheel
100 Mesh metal bond wet grinding disc. 5/8" - 11 thread | $130.00 |
| _____________________________________________________________________________________  4" Turbo Cup Wheel
Course grit with 5/8" -11 thread | $140.00 |
| _______________________________________________________________________________________ 
Dry Grinding Turbo Cup Wheels for Granite
5" Cup wheel | $168.00 |
|
 Felt polishing buffs
___________________________________________________________________________________________
 4" Vitrified Polishing Pads | 60 Mesh | $70.00 | | | 150 mesh | $60.00 | | Top
|
LAPIDARY EQUIPMENT & SUPPLIES
